The effects of operational parameters on surface characteristics of the ballised material

K. H. Wang; L. Blunt; L. T. Mao; C. C. Chao; K. J. Stout

doi:10.1016/S0890-6955(01)00073-6

The effects of operational parameters on surface characteristics of the ballised material

K. H. Wang, L. Blunt, L. T. Mao, C. C. Chao, K. J. Stout

Research output: Contribution to journal › Article › peer-review

2 Citations (Scopus)

Abstract

This paper presents an investigation into the mechanisms of the ballising process, focusing on the effects of operational parameters (overlap and initial surface roughness) on the final surface roughness of ballised components. In order to evaluate the ballising components, the two- and three-dimensional techniques of assessing surface roughness have been applied. The findings show that both results of the two- and three-dimensional measurements are consistent.

Original language	English
Pages (from-to)	2071-2078
Number of pages	8
Journal	International Journal of Machine Tools and Manufacture
Volume	41
Issue number	13-14
DOIs	https://doi.org/10.1016/S0890-6955(01)00073-6
Publication status	Published - Oct 2001

Access to Document

10.1016/S0890-6955(01)00073-6

Cite this

@article{affaf419209e4f028c64e77a61f6f701,

title = "The effects of operational parameters on surface characteristics of the ballised material",

abstract = "This paper presents an investigation into the mechanisms of the ballising process, focusing on the effects of operational parameters (overlap and initial surface roughness) on the final surface roughness of ballised components. In order to evaluate the ballising components, the two- and three-dimensional techniques of assessing surface roughness have been applied. The findings show that both results of the two- and three-dimensional measurements are consistent.",

keywords = "Ballising, Final surface roughness, Initial surface roughness, Overlap",

author = "Wang, {K. H.} and L. Blunt and Mao, {L. T.} and Chao, {C. C.} and Stout, {K. J.}",

year = "2001",

month = oct,

doi = "10.1016/S0890-6955(01)00073-6",

language = "English",

volume = "41",

pages = "2071--2078",

journal = "International Journal of Machine Tools and Manufacture",

issn = "0890-6955",

publisher = "Elsevier Limited",

number = "13-14",

}

TY - JOUR

T1 - The effects of operational parameters on surface characteristics of the ballised material

AU - Wang, K. H.

AU - Blunt, L.

AU - Mao, L. T.

AU - Chao, C. C.

AU - Stout, K. J.

PY - 2001/10

Y1 - 2001/10

N2 - This paper presents an investigation into the mechanisms of the ballising process, focusing on the effects of operational parameters (overlap and initial surface roughness) on the final surface roughness of ballised components. In order to evaluate the ballising components, the two- and three-dimensional techniques of assessing surface roughness have been applied. The findings show that both results of the two- and three-dimensional measurements are consistent.

AB - This paper presents an investigation into the mechanisms of the ballising process, focusing on the effects of operational parameters (overlap and initial surface roughness) on the final surface roughness of ballised components. In order to evaluate the ballising components, the two- and three-dimensional techniques of assessing surface roughness have been applied. The findings show that both results of the two- and three-dimensional measurements are consistent.

KW - Ballising

KW - Final surface roughness

KW - Initial surface roughness

KW - Overlap

UR - http://www.scopus.com/inward/record.url?scp=0035479644&partnerID=8YFLogxK

U2 - 10.1016/S0890-6955(01)00073-6

DO - 10.1016/S0890-6955(01)00073-6

M3 - Article

AN - SCOPUS:0035479644

VL - 41

SP - 2071

EP - 2078

JO - International Journal of Machine Tools and Manufacture

JF - International Journal of Machine Tools and Manufacture

SN - 0890-6955

IS - 13-14

ER -

The effects of operational parameters on surface characteristics of the ballised material

Abstract

Access to Document

Other files and links

Fingerprint

Cite this